Multipolar Parametric Induction Motor
1985
Four- and six-pole parametric motors were tested to investigate uses as low speed multipolar motors generating high torques. The four-pole parametric motor adopted toroidally wound Fe-Si plates in exciting magnetic circuits, and operated without a load at 1450 rpm. Though the output P o and efficiency ? were small, they should be greatly improved with better motor designs. A six-pole motor, built on the same principles, was successfully operated at an unloaded speed of 850 rpm, for a synchronized speed of 1000 rpm.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
1
References
0
Citations
NaN
KQI