Slow monitoring system for the JSNS$^{2}$ experiment

The JSNS$^{2}$ (J-PARC Sterile Neutrino Search at J-PARC Spallation Neutron Source) experiment is designed to look for neutrino oscillations over a 24 m short baseline at J-PARC. The JSNS$^{2}$ inner detector is filled with 17 tons of gadolinium(Gd)-doped liquid scintillator (LS) with an additional 31 tons of un-doped LS in the optically separated $\gamma$-catcher and outer veto volumes. A total of 120 photomultiplier tubes detect the scintillation event. Additionally, two anti oil-leak protection walls surround the detector to prevent leakage of the LS outside of the detector in any case. While filling the Gd doped LS and the un-doped LS, it is important to match the liquid level in the different layers to reduce stress between the layers. And it is also important to monitor inside of the anti oil-leak protection wall to confirm there is no leakage. For this purpose, we prepared ultrasonic level meters, temperature sensors, pressure meters, a flow meter. We adopted the LabVIEW program to acquire the sensor values and to record them in the MySQL database. We connected the database to the Grafana graphic tool. It is convenient to set the threshold values for warning and to draw the history of each sensor. All the combined systems are prepared and the demonstration shows promising performance for the JSNS$^{2}$ experiment.