The effect of high‐pressure food processing on the sorption behaviour of selected packaging materials

The sorption behaviour and flavour-scalping potential of selected packaging films in contact with food simulant liquids (FSLs) (ethanol and acetic acid solutions) were evaluated after high-pressure processing (HPP). The films used were monolayer polypropylene (PP), a multilayer (polyethylene/nylon/ethylene vinyl alcohol/polyethylene: PE/nylon/EVOH/PE), film and a metallized (polyethylene terephthalate/ethylene–vinyl acetate/linear low-density polyethylene: metallized PET/EVA/LLDPE) material. D-limonene was used as the sorbate and was added to each of the FSLs. After HPP treatment at 800 MPa, 10 min, 60°C, the amount of D-limonene sorbed by the packaging materials and the amount remaining in the FSL was measured. Untreated controls (1 atm, 60°C and 40°C) were also prepared. Extraction of the D-limonene from the films was performed using a purge/trap method. D-limonene was quantified in both the films and the FSL, using gas chromatography (GC). The results showed that D-limonene concentration, in both the films and the food simulants, was not significantly affected by HPP, except for the metallized PET/EVA/LLDPE. Significant differences in D-limonene sorption were found in comparison with the control pouches. The results also showed that changes in temperature significantly affected the sorption behaviour of all films. Copyright © 2004 John Wiley & Sons, Ltd.