Electron microscopy and atom probe tomography of nanoindentation deformation in oxide dispersion strengthened steels

Abstract Oxide Dispersion Strengthened (ODS) steels are candidates for fuel cladding materials in sodium-cooled fast reactors and for structural materials in nuclear fusion power reactors. The effect yttrium-titanium-oxygen (Y-Ti-O) nano-oxide precipitates within ODS steels have on the micromechanical deformation mechanisms has been investigated. The aim is to assess the extent of any direct link between the Y-Ti-O dispersion and nanoindentation hardness, using electron backscatter diffraction, transmission electron microscopy (TEM), and atom probe tomography (APT) studies of a Fe-14Cr-3W-0.2Ti-0.25Y2O3 (wt%) ODS steel at room temperature. Y-Ti-O nanoclusters had a non-uniform distribution and average number density that ranged from 5.8 ± 0.1 × 1023 to 1.3 ± 0.1 × 1024 m−3 and Guinier radii ranging from 1.8 ± 0.2 nm to 2.1 ± 0.2 nm. Surprisingly, the local Y-Ti-O distribution did not correlate strongly with the nanohardness, indicating that the dominant hardening mechanisms was at best only weakly related to the Y-Ti-O distribution. Instead, scanning TEM and APT confirmed that the dominant hardening mechanism was due to the grain boundary refinement, and was further enhanced by tungsten enrichment to ~3.5 at.% at grain boundaries.