Contamination of obsterics and gynecology hospital air by bacterial and fungal aerosols associated with nosocomial infections.

Bacterial and fungal bioaerosols are a global concern due to nosocomial infections, especially in developing countries. Our study aimed to detect fungal and bacterial bioaerosols in different wards of an obstetrics and gynecology hospital air samples. 240 bioaerosol samples were collected by performing impaction method from different wards of a hospital in the central part of Iran, during two seasons. Fungi genera and bacteria species are recognized by cultivation. Concentrations of bacteria and fungi were ranged from 44 to 75 CFU/m3 and 8 to 22 CFU/m3, respectively. Labor Delivery and Recovery (LDR) and Emergency room had first and second most contaminated air among all the hospital wards. No significant difference between microbial load of wards which used natural ventilation and heating, ventilating, and air conditioning (HVAC) system was observed. The microbial load was not affected significantly by temperature, working shift, and Inpatient Bed Occupancy Rate (IBOR). Fungal load related significantly with relative humidity. Staphylococcus aureus (detected in 48.3% of samples) and Penicillium (27%) were the most predominant isolated bacteria and fungi, respectively. The results revealed that the level of bacteria and fungi responsible for nosocomial infections in the air of this hospital is very low. Although levels of microbial contamination are relatively low, it is important to investigate the effect of bioaerosols on nosocomial infections, especially in neonates.