SAR analysis of tri-band antennas for a 5G eyewear device

The goal of this study is to analyze the specific absorption rate (SAR) distribution of the projected 5G frequencies below 6 GHz and at Wi-Fi frequency (2.45 GHz) on a human head, for eyewear device applications. Two separate tri-band printed dipole antennas for this purpose are designed and fabricated at operating frequencies of 2.45/3.8/6 GHz for prototype-1 and at operating frequencies of 2.45/3.6/4.56 GHz for prototype-2. In order to obtain the desired frequencies: first, the prototypes of the proposed antennas are fine-tuned via Computer Simulation Technology Microwave Studio (CST) and then fabricated on the FR4 layer. The reflection coefficient (S11) is tested and the simulation results are confirmed. In order to analyze the effect of wearing a pair of glasses' frame including a tri-band 5G antenna, a frame is designed and produced via 3D printer with polylactic acid material which has high dielectric constant (ɛr = 8.1). The SAR results of the proposed antennas have been examined for the cases where the antenna is embedded in the frame and is used alone. Both cases were analyzed by using the homogeneous specific anthropomorphic mannequin and the heterogeneous visible human head phantoms and the results have been evaluated in terms of SAR10 g values.