Following isothermal and non-isothermal crystallization of poly(3-hexylthiophene) thin films by UV-vis spectroscopy

Abstract We investigated non-isothermal and isothermal crystallization of spin-coated poly(3-hexylthiophene) thin films prepared from the melt by in-situ ultraviolet-visible absorption spectroscopy. Analyzing the absorption spectra according to the Franck-Condon principle allowed for a quantitative assessment of the degree of crystallinity as well as the quality of order within crystalline regions of the films. Measured at room temperature, we observed a similar crystallinity for all differently crystallized films. The highest quality of order, however, was found for the P3HT film cooled slowly from the melt. These results were in full agreement with the results obtained by X-ray diffraction and calorimetry measurements. Consistently, in spite of similar crystallinities, atomic force microscopy images did not show a well-defined structure of ordered domains of preferentially aligned lamellae for the films rapidly cooled from the melt. In addition, heating the P3HT films in a specific range of temperature showed no change in crystallinity in spite of a continuous loss of order quality. Our results revealed that crystallinity and crystalline quality could behave differently while processing a semicrystalline polymer.