Belt Conveyors Rollers Diagnostics Based on Acoustic Signal Collected Using Autonomous Legged Inspection Robot

Growing demand for raw materials forces mining companies to reach deeper deposits. Difficult environmental conditions, especially high temperature and the presence of toxic/explosives gases, as well as high seismic activity in deeply located areas, pose serious threats to humans. In such conditions, running an exploration strategy of machinery parks becomes a difficult challenge, especially from the point of view of technical facilities inspections performed by mining staff. Therefore, there is a growing need for new, reliable, and autonomous inspection solutions for mining infrastructure, which will limit the role of people in these areas. In this article, a method for detection of conveyor rollers failure based on an acoustic signal is described. The data were collected using an ANYmal autonomous legged robot inspecting conveyors operating at the Polish Ore Enrichment Plant of KGHM Polska Miedź S.A., a global producer of copper and silver. As a part of an experiment, about 100 m of operating belt conveyor were inspected. The sound-based fault detection in the plant conditions is not a trivial task, given a considerable level of sonic disturbance produced by a plurality of sources. Additionally, some disturbances partially coincide with the studied phenomenon. Therefore, a suitable filtering method was proposed. Developed diagnostic algorithms, as well as ANYmal robot inspection functionalities and resistance to underground conditions, are developed as a part of the “THING–subTerranean Haptic INvestiGator” project.