Preparation,Characterization and Gas Responsibilities of Al Doped α-Fe_2O_3
2007
Pure and Al doped Я-Fe2O3 materials were prepared by a solution phase controlled hydrolysis me-thod, and were characterized by XRD, SEM and ICP techniques. Gas-sensing properties were carried out on gas sensors from these materials under laboratory and humid conditions. The experiments indicate that the crystalline size of Al doped α-Fe2O3 materials is less than that of pure one, and their conductivity increases obviously; the resultant Al doped Fe2O3 gas sensor exhibites a high response and a short response/recovery time in the detection of low concentrations of various combustible gases. The Al doped Fe2O3 sintered at 400 ℃, which is more stable than one sintered at 300 ℃, is suitable as a gas sensor for ethanol alcohol.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
0
References
0
Citations
NaN
KQI