Coupling High-Resolution Numerical Weather Prediction and Computational Fluid Dynamics: Auckland Harbour Case Study

In this study, the resilience of large cities and their built infrastructure in New Zealand to extreme winds, is investigated by coupling the outputs of a very high-resolution, 333-m resolution, numerical weather prediction (NWP) model with computational fluid dynamics (CFD) simulations. Following an extreme wind event on 18 September 2020 in Auckland, in which two trucks travelling over the Auckland Harbour bridge tipped over and damaged the bridge structure, a CFD simulation of airflow over the bridge using the Reynolds-averaged Navier–Stokes (RANS) method and NWP wind speed forecasts as the inlet profile is conducted. The 333 m NWP forecasts were validated against four nearby observation sites, showing generally high correlations of greater than 0.8 and low mean bias (±3 m s−1) and RMSE (<3 m s−1) values. The CFD-based estimates of the mean wind speed-up over the bridge showed that the mean wind speed could increase by a factor of 1.15–1.20 in the vicinity of the road where the toppled vehicles were travelling. Additionally, NWP forecasts and CFD estimates of wind gusts at the maximum bridge height, within the area not affected by the bridge structure, agreed well with a value of about 25 m s−1. An anemometer mounted at the top of the bridge arch measured a higher gust wind speed of about 35 m s−1 that could have been influenced by the gust speed-up resulting from the flow separation from the bridge arch, which is demonstrated in the CFD results. The results demonstrate the importance of understanding localised wind speed-up effects and distinguishing them from the approaching undisturbed airflow.