Preliminary feasibility and cost analysis of the in-situ microbial filter concept

1992 
In this report the cost of installing and operating an in-situ microbial filter to remediate a site at which the groundwater is contaminated by TCE is estimated and compared against the cost of remediation by a standard pump and treat method. In this microbial filter method, relatively thin vertical filters are installed in the subsurface to intercept contaminant plumes that are being transported by the flowing groundwater. The filters are created by injecting into the subsurface methanotrophic microbes grown in surface bioreactors and allowing them to become attached to the soil. The microbes produce an enzyme (MMO) that fortuitously catalyzes the degradation of TCE into carbon dioxide, water and chloride ions. Because no external energy or carbon source is provided, the microbes remain metabolically active only for a limited time so that the filter needs to be periodically replenished with fresh microbes. Two methods of establishing and maintaining the microbial filter using either vertical or horizontal wells were studied. In the pump and treat method considered for comparison, the groundwater pumped to the surface is first subjected to air-stripping of the liquid-phase volatile organic compound (i.e., VOC) from the groundwater followed by adsorption of the heated vapor-phase VOC by granularmore » activated carbon (i.e., GAC) within a packed-bed filter.« less
    • Correction
    • Source
    • Cite
    • Save
    • Machine Reading By IdeaReader
    0
    References
    4
    Citations
    NaN
    KQI
    []