The impact of sampling approach and daily water usage on lead levels measured at the tap.

ABSTRACT There are many sampling approaches available for lead (Pb) in drinking water. Selecting the best approach for its intended use is critical. The objective of this work was to compare water Pb levels collected by multiple sampling approaches from a model home plumbing system (HPS) that included an old Pb service line (LSL), as a function of daily water usage. Specifically, flushed, direct LSL, sequential profile, random daytime (RDT), first draw, and manual composite samples were compared, and daily water usage rates ranged from 1.4-120 gallons/day (5.3-454.2 L/day). Pb levels in water collected directly from the LSL reached equilibrium after 7-15.5 hours of stagnation, and approximately 55% of the equilibrium Pb concentration was reached after 2 hours. Sequential sampling accurately identified the LSL; however, the peak profile Pb concentrations were a fraction of the Pb measured directly from the LSL. Daily water usage patterns greatly impacted total Pb levels in all water sampling approaches, although manual composite and RDT samples were more sensitive to changes. Manual composite and RDT samples were equal to or greater than first draw samples throughout the study, and differences grew larger as water usage decreased.