The effect of a curved bed on the discharge equation in a spillway with a breast wall

The flow through a breast wall spillway is greatly affected by the centripetal force due to a downstream curved profile. Therefore, the mean vertical pressure distribution at the outlet section is not consistent with the hydrostatic pressure law. This distribution in turn affects the discharge capacity of the breast wall spillway. This paper experimentally studies the effect of a convex downstream profile on the mean pressure variation and the discharge of a breast wall spillway without gates. It is indicated that the effect of the curvilinear streamline on the mean vertical pressure variation is significant. The regression analysis method is used to determine the water head effect Z o of the orifice opening through the mean pressure variation. A discharge prediction formula of the breast wall spillway is obtained under the limited conditions of a laboratory flume. The predicted discharge is compared to the measured discharge. A good agreement is evidenced for the free orifice flow with errors within ?5%, while a big error(20% or even more) is obtained if the hydrostatic pressure law is used for the determination of Zo.