A durable microsecond solid-state pulsed power system

An all-solid-state microsecond pulsed power system has been tested in this paper. It can produce larger than 50 kV and microsecond-range pulses continuously for more than 9 × 104 shots into a resistive load at a repetition rate of 10 pps. The whole device has accumulatively operated more than 15 000 pulses at 100 Hz and 3 × 105 pulses at 10 Hz. This all-solid-state pulsed power system consists of a repetitive power supply, a four-stage Marx generator, a pulse forming network, and a resistive load. The repetitive power supply of the pulsed power system is calculated and analyzed first, followed by the introduction of the Marx generator and the three-section anti-resonance network. A polymer box of sodium chloride solution is applied as a resistive load with an impedance of 200 Ω. Repetitive experiments showed that this system is able to operate stably at 100 Hz repetition rate without failure.