Numerical study on pre-film atomization mechanism and characteristics by a coaxial swirl injector:

The overall process and mechanism of the centrifugal pre-film atomization with double swirling flow were studied using the methods of large Eddy simulation and volume of fluid. The atomization process includes a centrifugal jet under the primary swirl and a pre-film atomization under the two-stage counter-rotating swirl at the venturi outlet. The fuel is ejected from the outlet of the centrifugal nozzle and undergoes the transient process of reaching the venturi throat. The breaking mechanism of liquid film in this process is the same as that of the formation mechanism of the mushroom-shaped tip of liquid jet. The numerical simulation results are highly consistent with the experimental results. For the formation and development of the liquid film on the venturi wall, collision and wave action promote the expansion of the liquid film. At the outlet position of the venturi tube, the short wave mode and the two-stage reverse swirling structure play major roles in the fragmentation process of the flake liquid...