Hierarchical Structured Electrospun Nanofibers for Improved Fog Harvesting Applications

Collection of clean water from humid air has attracted immense attention in recent years due to the lack of access to pure drinking water among large section of population in several parts of the world. Hence, there is a persistent demand for the fabrication of robust, scalable membranes for efficient harvesting of pure water, especially in fog-laden areas. Herein, three different membranes based on neat nanofibers, nanofibers with microparticles, and nanofibers with hierarchical structures (nanopillars) are successfully fabricated using poly(vinylidene fluoride-co-hexafluoropropylene) and fluorinated polyhedral oligomeric silsesquioxane composite mixture. Neat nanofibers and nanofibers with microparticles are fabricated by employing direct electrospinning and electrospinning combined with electrospraying process, respectively. Hierarchical structured fibers are fabricated by growing nanopillars on the surface of the fibers using electrospinning combined with template-wetting method. The wettability properties including water contact angle and hysteresis of these membranes are investigated. Due to the increased surface roughness and low surface energy, the hierarchical fibers exhibit higher contact angle (153°) and lower hysteresis (3°) compared to the neat nanofibers and nanofibers with microparticles. Furthermore, the results demonstrate that the presence of nanopillars on the surface of the nanofibers improves the membrane's water collection efficiency when exposed to humid air.