Temperature effect on electrospinning of nanobelts: the case of hafnium oxide

Electrospinning is a convenient and versatile method for fabricating different kinds of one-dimensional nanostructures such as nanofibres, nanotubes and nanobelts. Environmental parameters have a great influence on the electrospinning nanostructure. Here we report a new method to fabricate hafnium oxide (HfO2) nanobelts. HfO2 nanobelts were prepared by electrospinning a sol–gel solution with the implementation of heating and subsequent calcination treatment. We investigate the temperature dependence of the products by scanning electron microscopy (SEM), transmission electron microscopy (TEM), selected area electron diffraction (SAED), and energy-dispersive x-ray (EDX) spectroscopy. The heating temperature of spinning ambient is found to be crucial to the formation of HfO2 nanobelts. By tuning the temperature, the morphological transformation of HfO2 from nanowires to nanobelts was achieved. It was found that the rapid evaporation of solvent played an important role in the formation process of HfO2 nanobelts. It is shown that nanobelts can only be obtained with the temperature higher than 50 °C and they are in the high quality monoclinic phase. A possible growth mechanism of the nanobelts based on phase separation is proposed. The enhanced photoluminescence (PL) of HfO2:Eu3 + nanobelts is also illustrated.