Method for the Energy Storage Configuration of Wind Power Plants with Energy Storage Systems used for Black-Start

With the increasing participation of wind generation in the power system, a wind power plant (WPP) with an energy storage system (ESS) has become one of the options available for a black-start power source. In this article, a method for the energy storage configuration used for black-start is proposed. First, the energy storage capacity for starting a single turbine was determined. Then, a hierarchical planning model was established. This model did not consider the starting efficiency of the WPP, but it did consider the layout of the energy storage in the WPP and the balance of the terminal voltage when starting the WPP. Finally, the feasibility and value of the proposed method and model were verified in a 49.5 MW WPP with an ESS (a power rating of 2.24 MW and energy capacity of about 1.68 MWh). The result suggests that configuring an ESS with a small capacity on the side of the turbine can achieve black-start for a WPP with an ESS as the power source.