Development of Processing Maps for 3003 Al Alloy
2011
The 3003 Al alloy was deformed by isothermal compression in the range of deformation temperature 300-500 °C at strain rate 0.0l-10.0 s-1 with Gleeble-1500 thermal simulator. Processing maps at a strain of 0.6 for hot working were developed on a dynamic materials model. The maps exhibit a flow instability domain at about 300 °C-380 °C and 1.0-10.0 s-1. DRX occurs extensively in the temperature range of 450-500 °C and at the strain rate of 10.0 s-1. The optimum parameters of hot working for 3003 Al alloy at the strain of 0.6 are confined at 500 °C and 10.0 s-1 with the highest efficiency (37%).
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
17
References
2
Citations
NaN
KQI