Design and Motion Simulation of the Clamping Mechanism of Micro-Structure Injection Molding Machine

Micro-structure injection molding machine is mainly used for processing the plastic products in micron-size or with micro-structures. This paper focuses on the design and control of the clamping mechanism of micro-structure injection molding machine. Firstly, the deformation of the clamping mechanism was analyzed. The simulation results shows that the clamping force is 5.0051×105N, and it’s bigger than the design value 500kN. Secondly, the kinetic characteristic of the clamping was simulated by ADAMS software. The curves of the displacement, velocity, clamping force of moving platen were analyzed. Thirdly, the control model of clamping mechanism was established. And the LQR controller was designed and simulated by Matlab. The rise time is 0.010s, the settling time is 0.026s and the steady-state is 0.307m.