Benchmark of CFD Modeling of TLP Free Motion in Extreme Wave Event

In this study, a numerical wave tank was set up to simulate the free motion of a Tension Leg Platform (TLP) in extreme wave event. For better computational efficiency, a nonlinear potential flow solver is coupled with a CFD software, with the former to simulate the far-field wave domain and the latter to simulate the near-field wave domain and platform motion. In order to benchmark against model test, a five-minute time window of interest was selected from the extreme sea state in model test. The incoming irregular wave was firstly reconstructed from the measured wave time history using the nonlinear potential flow solver and then applied as input to CFD simulations for two different headings to the platform. Static offset tests and free decay tests were simulated in CFD initially to confirm that the platform and tendon properties were properly modeled. The 6-DOF platform motions were then obtained from the CFD simulations and the time histories of motion, air gap, and tendon tension were compared with model test measurements. Good agreements were achieved except for the initial transient period and low-frequency motions. In particular, the air gap or relative wave elevation compared well for all the locations around the platform. The high frequency response in tendon tension and the different tension characteristics of weather side tendons and leeside tendons were also well captured.Copyright © 2014 by ASME