Using self-etch adhesive agents with pit and fissure sealants. In vitro analysis of shear bond strength, adhesive remnant index and enamel etching patterns.

Purpose The aim of this study was to evaluate in vitro, the shear bond strength (SBS) and adhesive remnant index (ARI) of pit and fissure sealants (PFS) after enamel conditioning with different new-generation self-etching (SE) agents; additionally, enamel etching patterns were assessed. Methods Healthy unerupted third molars surgically removed for therapeutic reasons (n = 25p/g), were randomly assigned to six groups. Conventional etching (CE) or SE was applied prior to pit and fissure sealants bonding. Enamel conditioned surfaces were evaluated by SEM at × 500, × 1000, and × 2000 magnification to determine etching patterns. Subsequently, 25 PFS blocks (3 × 2 × 1.5 mm) p/g were bonded to enamel surface. Samples were stored in water at 37 °C for 24 h, previous to SBS and ARI test. One-way ANOVA and Tamhane statistic tests were used for SBS; while Mann-Whitney U and Kruskal-Wallis were employed for ARI (p ≤ 0.05). Results For SBS test, CE_PFS_3M and SE1_PFS_Shofu groups showed the lowest values (8.74 ± 4.02 and 8.75 ± 3.90, respectively). The highest scores were observed in SE_PFS_Kuraray group (13.46 ± 5.83). Significant differences in SBS and ARI assessments were found. All experimental groups showed type 1 etching pattern. Conclusion The etching pattern was less pronounced in self-etching groups, which showed an equal or superior in vitro performance compared to conventional etching agents. The clinical use of self-etching agents could be recommended before pit and fissure sealants application in new dental protocols. The best in vitro performance was observed when both applied materials, self-etching agent and pit and fissure sealant have 10-methacryloyloxydecyl dihydrogen phosphate in their chemical composition.