Promising wastewater treatment using rare earth-doped nanoferrites

Abstract Single-phases of the spinel nanoferrites Zn 0.5 Co 0.5 Al 0.5 R 0.04 Fe 1.46 O 4 ; R=Sm, Pr, Ce and La, were synthesized using the flash auto combustion method. X-ray diffraction (XRD) results indicated that doping nanoferrites with small concentrations of rare earth elements (RE) allowed their entrance to the spinel lattice. Transmission electron microscope (TEM) images revealed that doping with different RE elements resulted in the formation of different nanometric shapes such as nanospheres and nanowires. Doping with Sm 3+ and Ce 3+ resulted in the formation of nanospheres with average diameter of 14 and 30 nm respectively. In addition to the granular nanospheres, doping with Pr 3+ and La 3+ resulted in the formation of some nanowires with different aspect ratios (average length of ≈100 nm and diameter of ≈9 nm) and (average length of ≈150 nm and outer diameter of ≈22 nm) respectively. At fixed temperature, the Ac conductivity ( σ ) increased as the RE ionic radius increases except for Ce, due to the role of valance fluctuation from Ce 3+ to Ce 4+ ions. La- and Pr-doped nanoferrites showed the highest ac conductivity values, which is most probably due to the presence of large numbers of nanowires in these two types of ferrites. For all entire samples, the effective magnetic moment ( μ eff ) decreased, while the Curie temperature ( T C ) increased as the RE ionic radius increases. The synthesized rare earth nanoferrites showed promising results in purifying colored wastewater. La-doped ferrite was capable for up-taking 92% of the dye content, followed by Pr-doped ferrite, which adsorbed 85% of the dye, while Sm- and Ce-doped ferrites showed lower dye removal efficiency of 80% and 72% respectively. High dye uptake shown by La- and Pr-doped ferrites is most probably due to the presence of nanowires and their higher Ac conductivity values. These excellent results were not previously reported.