Real-time monitoring of the rubber belt tension in an industrial conveyor

The paper presents a novel system for monitoring of the work of industrial belt conveyor. It is based on the strain gauges placed directly on the roller surface that measure pressing force of the belt on the roller. Automatical operation of the measurement system minimizes impact of an operator on the measurement results. Experimental researches included the stability of indications during 5 days, Type A uncertainty estimation and equipment variation EV calculations. Expanded uncertainty calculated for the level of confidence 95% was below 0.1% of the actually measured value, and percentage repeatability %EV = 9.5% was obtained. It can be considered satisfactory, since usually it is required %EV < 10% for new measurement systems.