The modeling of the «diaphragm wall» with the anchor without the use of distribution beams

The article describes the features of modeling monolithic trench “diaphragm wall” with ground anchors without the use of distribution beams on the progressive collapse caused by the failure of one of the anchors. In the simulation of the above calculation case, in the flat formulation commonly used in practice, it is assumed that the “diaphragm wall” is a continuous structure in the longitudinal direction, without taking into account the presence of vertical joints formed between the grippers when concreting the fence and the lack of connection between the longitudinal reinforcement of adjacent reinforcement spatial frameworks. The performed calculations show that the failure to take into account these circumstances leads to a significant reassessment of the ability of the “diaphragm wall” to redistribute the load from the broken anchor to the neighboring anchor and can lead to an incorrect assessment of the results of the calculation for a progressive collapse. The need to take into account the reduction of structural rigidity of the “diaphragm wall” due to the formation of cracks in two directions is also shown.