The Effect of Hydrothermal Treatment on Structure and Flotation Characteristics of Lignite and a Mechanistic Analysis

Lignite is difficult to obtain highly efficient indexes by conventional flotation due to its poor surface hydrophobicity. Although the modification of flotation reagents has made some progress in improving the flotation performance, they all remain at the stage in the laboratory. Here, we proposed to improve the flotation performance by hydrothermal treatment dewatering (HTD) for lignite. Combined with the 13C NMR and FT-IR analysis, the impact of the HTD process on lignite's chemical structural evolution and flotation performance was investigated. The results showed that the HTD process is an effective means for dehydration and deoxygenation to increase lignite quality and the metamorphic degree of coal. The content of oxygen-containing functional groups generally decreases during the HTD process, especially carboxyl acid and ether groups. Therefore, surface properties and wettability of HTD coal samples were changed, and the contact angle gradually increases with the HTD temperature increased, which enhance the hydrophobicity and decrease hydrophilia of the lignite surface. The HTD process effectively improves the flotation performance of lignite during the conventional flotation operation condition, even if the coal pulp after HTD was directly used as a flotation feedstock. Specifically, the coal oil and capryl alcohol were used as collector and forming agents, respectively, and the pulp concentration was adjusted to 60 g/L. The yield of the cleaned coal increased from 12.14% of the raw coal to 55.58% of HTD310, and combustible matter recovery increased from 13.83% of the raw coal to 65.17% of HTD310 by raw coal basis.