Color stability of glass-ionomers and polyacid-modified resin-based composites in various environmental solutions.

PURPOSE: To evaluate the degree of color stability of glass-ionomers (GIs) and polyacid modified resin-based composites (PMRBCs) in various environmental solutions. MATERIALS AND METHODS: Seven polyacid-based esthetic restorative materials were used: three chemical-cured GIs, one resin-modified GI and three polyacid-modified RBCs. A light-cured resin-based composite (RBC) (Z 100) was used as a control. Disk type specimens were prepared and were aged in four different solutions (deionized water, 0.1 mole acetic acid solution, 75% ethanol, and 10% hydrogen peroxide solution) for 1, 7, 14, 21, 28, and 56 days. The specimens were kept at 37 degrees C throughout the study. Color coefficients (CIE L*a*b*) were measured by a reflection spectrophotometer with SCE mode, and the surface of specimens was examined by a stereo zoom microscope. RESULTS: In deionized water, all specimens showed an acceptable color stability. All of the GIs and PMRBCs showed significant color change in 0.1 mole acetic acid solution. The light-cured resin-modified GI showed a significant color change in 75% ethanol solutions. 10% hydrogen peroxide solution resulted in degradation and a high degree of color change for chemical-cured GIs. The light-cured resin-modified GI and PMRBCs showed high color change in 10% hydrogen peroxide solution. The light-cured RBC (Control), showed excellent color stability in all experimental solutions.