Thermally enhanced adsorption and persulfate oxidation-driven regeneration on FeCl3-activated biochar for removal of microcystin-LR in water.

Abstract In this study, a cyclic process of adsorption and persulfate (PS) oxidation-driven regeneration using FeCl3-activated biochar (FA-BC) was suggested as a novel remediation process to remove microcystin-LR (MC-LR) from water. For enhancing overall treatment efficiency and cost effectiveness, the impacts of temperature on adsorption and PS oxidation-driven regeneration were investigated. The increase of temperature resulted in the increase of MC-LR adsorption rate on FA-BC due to the enhanced MC-LR diffusivity in water. Moreover, the MC-LR oxidation and PS reaction rates during the PS regeneration on FA-BC were remarkably improved by factors of 3.4 and 3.5 with increasing temperature from 20 °C to 50 °C. Both diffusion and desorption of MC-LR from FA-BC were thought to be the key factors for controlling the MC-LR oxidation rate during the PS regeneration of MC-LR. In addition, the decrease of pH (from 10 to 4) and increase of PS concentration (from 100 to 400 mg/L) enhanced the regeneration efficiency for MC-LR-spent FA-BC. The four cycles of adsorption-PS regeneration (200 mg/L PS, pH 6, and 50 °C) resulted in 92.81% regeneration efficiency in DI water and 82.89% in lake water. However, the four cycles of adsorption-PS regeneration led to the reduction of surface area (from 835 to 413 m2/g), oxidation of carbon surface and slight reduction of Fe0 on FA-BC. In overall, the cyclic adsorption-PS regeneration at higher temperature could provide practical reuse of FA-BC for cost-effective treatment of aqueous MC-LR.