Three-dimensionally ordered macroporous SnO2 as anode materials for lithium ion batteries

Abstract This paper describes a modified colloidal crystal templating method to prepare three-dimensionally ordered macroporous (3DOM) SnO 2 as anode materials for lithium ion batteries. The as-prepared 3DOM-SnO 2 delivered a higher reversible lithium storage capacity (653 mA h g −1 ) than non-templated SnO 2 nanoparticles (327 mA h g −1 ). In addition, 3DOM-SnO 2 electrode exhibited an excellent rate capacity of 326 mA h g −1 at a high current density of 2 C (1.56 A g −1 ). Good capacity retention performance was also observed in the 3DOM-SnO 2 electrode after 50 cycles at the current density of 0.2 C, maintaining the specific capacity of 338 mA h g −1 . The improved electrochemical performance of the 3DOM-SnO 2 electrode benefits from the 3DOM architecture, which can not only shorten the Li + ions diffusion paths within the macropore walls, but also buffer the volume changes during the charge and discharge processes. More importantly, the continuous void space of the 3DOM structure can be readily filled with electrolyte solution, resulting in the improved ionic and electric conductivity. These merits combined with the synergistic effects of smaller particle size should be responsible for the good electrochemical performance. The excellent electrochemical performance of 3DOM-SnO 2 shows its promising applications as an anode material for lithium ion batteries.