A pilot study of the effects of a vacuum sealing barrier method for photostimulable phosphor plates regarding plate damage and prevention of microbiologic cross-contamination

Objective The aim of this study was to evaluate the effectiveness of a new sealing method for preventing cross-contamination of photostimulable phosphor (PSP) plates. Study Design Twelve new PSP plates were divided into 3 groups (PSP-a, PSP-b, and PSP- c) and placed in 3 different barriers (2 different brands of envelopes and a vacuum sealing method). All plates were exposed to X-rays with an aluminum step wedge, and the images were evaluated for the presence of any artifacts. After radiography, the PSP plates were removed from the barriers. The barriers and the PSP plates were disinfected and culture performed to assess any microorganism burden. Subsequently, the PSP plates were coated again with all barriers. The barriers were then contaminated and microbiologic specimens were collected . Subsequently, the barriers were wiped with alcohol. The PSP plates were removed, and microbiologic specimens were obtained. Results No artifacts were recorded on the radiographic images on the sensors in any group. Microorganisms were detected on the PSP plates placed in envelopes. No colonization of microorganisms was detected on the vacuum sealed PSP plates. Conclusions The new vacuum-sealing method may be useful in preventing cross-contamination of PSP plates during radiographic procedures.