Design of a Cryogen Free Cryo-flipper using a High Tc YBCO Film

Abstract It is well-known that the Meissner effect in superconducting materials can be used to provide a well-defined non- adiabatic magnetic field transition that can be utilised to produce an efficient white beam neutron spin flipper. Typically these devices utilise niobium and hence require continuous use of liquid helium in order to maintain the device tem- perature. The use of high Tc materials removes the need for cryogens and has been explored previously and shown to provide efficient flipping of the neutron spin. Improvements in thin high T c films over the past few years make these materials even more attractive. Here we present a design using a 350-nm-thick YBCO film capped with 100 nm of gold on a 78 x 100 x 0.5 mm sapphire substrate (Theva, Germany). The apparatus is compact (200 mm in length along the neutron beam), consisting of an oxygen-free high-conductivity copper frame, which holds the YBCO film and is mounted to the cold finger of a closed-cycle refrigerator. The part of the vacuum chamber, where the YBCO film is located, is ≈ 50 mm wide, which allows us to minimise the distance from the film to the external magnets. This distance is 26 mm on each side. The details of the guide field design are also discussed. In this design, the maximum neutron beam size that can be used is 40 × 40 mm2 and we can easily switch from a vertical to a horizontal guide field on either side of the YBCO film.