Evaluation and comparison of the levels of occupational exposure to cobalt during dry and/or wet hard metal sharpening. Environmental and biological monitoring

Abstract To investigate risks to hard metal tool sharpeners, 80 factories in the Lombardia Region (North Italy) were selected and examined. The scope of the survey consisted of verifying and quantifying that risk, so as to be able to control it and reduce it as far as is possible. We singled out a group of 12 factories, comprising ∼750 workers 60 of whom were exposed to cobalt, in which operations such as sharpening with diamond grinding stones are normally carried out. In those factories, the risk was quantified by determining the concentration of cobalt in dust, collected by means of personal and fixed samplers (23 measurements) during sharpening operations. The station had no local ventilation device; sharpening is mainly performed wet and has been found to present a greater risk than those where sharpening is exclusively performed dry. Results were confirmed by biological monitoring which showed the presence of cobalt excreted in exposed workers' urine collected at the end of the work shift.