Preparation and photocatalytic activity of chemically-bonded phosphate ceramics containing TiO2

Abstract Titanium dioxide was incorporated into chemically-bonded phosphate ceramic for use as photocatalytic inorganic coating. The coatings obtained were applied to unglazed ceramic tiles and cured at 350 °C. The surfaces were characterized by photocatalytic activity, determined in aqueous medium, based on the degradation of methylene blue dye. The effects of the percentage of TiO 2 and the thickness of the layer on the photocatalytic efficiency were evaluated. The influence of the incorporation of TiO 2 on the consolidation of the phosphate matrix coating was investigated using the wear resistance test. The crystalline phases of the coatings obtained were determined by XRD. The microstructure of the surfaces was analyzed by SEM. The thermal curing treatment did not cause a phase transition from anatase to rutile. An increase in the photocatalytic activity of the coating was observed with an increase in the TiO 2 content. The dye degradation indices ranged from 14.9 to 44.0%. The photocatalytic efficiency was not correlated with the thickness of the coating layer deposited. The resistance to wear decreased with an increase in the TiO 2 content. Comparison with a commercial photocatalytic ceramic coating indicated that there is a range of values for the TiO 2 contents which offer potential for photocatalytic applications.