Electrical characteristics of etched ion-tracks in polyimide filled with silver nanoparticles

ABSTRACTSilicon ions, of energy 150 MeV and fluence ∼1012 ions/cm2, were used to register latent tracks in 40 µm thick polyimide samples. Different sizes of tracks were obtained by etching the ion irradiated polyimide samples, in chemical solutions, by varying the temperature and etching period. Silver nanoparticles were diffused into the etched tracks by immersing the polyimide samples in silver solution and then irradiating with 6.5 MeV electrons at different fluences varying from 1 × 1015 to 5 × 1015 cm−2. Results of morphological and elemental analysis, carried out by Scanning Electron Microscopy and Energy Dispersive X-ray. Analysis revealed that the conical tracks could be fully filled with silver nanoparticles at electron fluence of 5 × 1015 cm−2. The minimum d. c. resistance of an array of tracks, filled with silver nanoparticles and measured across the polyimide film, was orders of magnitude higher as compared to that of silver wires of equivalent sizes connected in parallel. In addition, these s...