Research on the Correction Method of the Capillary End Effect of the Relative Permeability Curve of the Steady State

2021 
Relative permeability curve is a key factor in describing the characteristics of multiphase flow in porous media. The steady-state method is an effective method to measure the relative permeability curve of oil and water. The capillary discontinuity at the end of the samples will cause the capillary end effect. The capillary end effect (CEE) affects the flow and retention of the fluid. If the experimental design and data interpretation fail to eliminate the impact of capillary end effects, the relative permeability curve may be wrong. This paper proposes a new stability factor method, which can quickly and accurately correct the relative permeability measured by the steady-state method. This method requires two steady-state experiments at the same proportion of injected liquid (wetting phase and non-wetting phase), and two groups of flow rates and pressure drop data are obtained. The pressure drop is corrected according to the new relationship between the pressure drop and the core length. This new relationship is summarized as a stability factor. Then the true relative permeability curve that is not affected by the capillary end effect can be obtained. The validity of the proposed method is verified against a wide range of experimental results. The results emphasize that the proposed method is effective, reliable, and accurate. The operation steps of the proposed method are simple and easy to apply.
    • Correction
    • Source
    • Cite
    • Save
    • Machine Reading By IdeaReader
    22
    References
    0
    Citations
    NaN
    KQI
    []