Fixed Ammonium Content and Maximum Capacity of Ammonium Fixation in Major Types of Tillage Soils in Hunan Province, China

Abstract In order to understand the status of fixed ammonium, fixed ammonium content, maximum capacity of ammonium fixation, and their influencing factors in major types of tillage soils of Hunan Province, China, were studied with sampling on fields, and laboratory incubation and determination. The main results are summarized as follows: (1) Content of fixed ammonium in the tested soils varies greatly with soil use pattern and the nature of parent material. For the paddy soils, it ranges from 135.4 ± 57.4 to 412.8 ± 32.4 mg kg −1 , with 304.7 ± 96.7 mg kg −1 in average; while it ranges from 59.4 to 435.7 mg kg −1 , with 230.1 ± 89.2 mg kg −1 in average for the upland soils. The soils developed from limnic material and slate had higher fixed ammonium content than the soils developed from granite. The percentage of fixed ammonium to total N in the upland soils is always higher than that in the paddy soils. It ranges from 6.1 ± 3.6% to 16.6 ± 4.6%, with 14.0% ± 5.1% in average for the paddy soils and it amounted to 5.8 ± 2.0% to 40.1 ± 17.8%, with 23.5 ± 14.2% in average for upland soils. (2) The maximum capacity of ammonium fixation has the same trend with the fixed ammonium content in the tested soils. For all the tested soils, the percentage of recently fixed ammonium to maximum capacity of ammonium fixation is always bellow 20% and it may be due to the fact that the soils have high fertility and high saturation of ammonium-fixing site. (3) The clay content and clay composition in the tested soils are the two important factors influencing their fixed ammonium content and maximum capacity of ammonium fixation. The results showed that hydrous mica is the main 2:1 type clay mineral in P 0.01 or P 0.05 , respectively, but not correlated with the total 2:1 type clay mineral content and hydrous mica content in