Plate Load Tests on Cemented Soil Layers Overlaying Weaker Soil

This paper addresses the interpretation of plate load tests bearing on double-layered systems formed by an artificially cemented compacted top soil layer (three different top layers have been studied) overlaying a compressible residual soil stratum. Applied pressure-settlement behavior is observed for tests carried out using circular steel plates ranging from 0.30 to 0.60 m diameter on top of 0.15 to 0.60-m-thick artificially cemented layers. The paper also stresses the need to express test results in terms of normalized pressure and settlement—i.e., as pressure normalized by pressure at 3% settlement ( p/ p3% ) versus settlement-to-diameter ( δ/D ) ratio. In the range of H/D (where H= thickness of the treated layer and D= diameter of the foundation) studied, up to 2.0, the final failure modes observed in the field tests always involved punching through the top layer. In addition, the progressive failure processes in the compacted top layer always initiated by tensile fissures in the bottom of the layer. ...