Preparation of Ti-based Yb-doped SnO2-RuO2 electrode and electrochemical oxidation treatment of coking wastewater

Abstract In this study, the Ti/SnO2-RuO2 electrodes with different Yb contents were prepared by sol-gel method and thermal decomposition method, and the surface morphology and crystal structure of the electrodes were characterized by scanning electron microscopy (SEM), atomic force microscope (AFM) and X-ray diffraction (XRD), the electrochemical properties of the electrodes were tested by linear sweep voltammetry (LSV) and cyclic voltammetry (CV). The electrochemical oxidation device was constructed with Yb-doped Ti/SnO2-RuO2 electrode as the anode and titanium plate as the cathode, and the electrochemical oxidation effect and product changes of the anode on coking wastewater were investigated. The results show that the surface of the electrode is flat with high crystallinity of SnO2 and RuO2 crystals at 1.5% Yb doping, and the LSV and CV curves indicate that the rare earth doping of 1.5% increases the oxygen precipitation potential and electrocatalytic oxidation activity of the electrode. When the electrode with rare earth doping of 1.5% is the anode with current density of 10mA/cm2 electrochemical oxidation time of 30min, the electrode can remove COD up to 85.06%, TOC up to 60.59% and UV254 from 1.594 to 0.507 for coking wastewater. GC-MS, UV-vis and three-dimensional fluorescence results of coking wastewater before and after treatment show that large toxic substances in coking wastewater are degraded to low toxic organic substances, and most soluble organic substances are degraded and transformed. This study provides the possibility of basic research for the engineering practice of electrochemical oxidation for the treatment of coking wastewater.