In-situ observation for natural gas hydrate in porous medium: Water performance and formation characteristic.

Abstract Extensive efforts have been made regarding gas hydrate sample reconstruction in the laboratory for a better understanding and development of natural gas resources. Magnetic resonance imaging (MRI) is a useful method for directly observing the reconstruction of methane hydrate, yet relevant studies remain limited. In this study, a 9.4-T 400-MHz MRI instrument was employed to investigate CH4 hydrate formation in porous media involving various initial water saturation levels and sand diameters. Pressure histories and MRI signal variations were monitored to discuss the process of CH4 hydrate growth, and the three main formation stages of induction, rapid growth, and slow formation were determined. Furthermore, the liquid water performance in MRI micro-images was analyzed to predict the characteristics of CH4 hydrate formation. The results indicated that CH4 hydrate formed in a spatially and temporally random manner and that pore plugging occurred owing to the residual water encased in grown hydrate. Additionally, phase saturations, water conversion percentages, and formation rates were defined to evaluate the effect of sand diameter and initial water saturation on CH4 hydrate formation. With the reduction in the diameter of quartz glass beads from 400 μm to 100 μm, the average hydrate formation rate increased from 0.0010 min−1 to 0.0034 min−1, respectively. When the initial water saturation decreased to the optimized value (0.22 in this study), the water conversion percentage and hydrate saturation increased.