The influence of alumino-silicate matrix composition on surface hydrophobic properties

2019 
The purpose of this investigation is to investigate the hydrophobicity of geopolymers, new alumino-silicate materials and the influence of Si/Al ratio on their surface properties. Contact angle measurement (CAM) as reliable indicator of hydrophobicity was determined for synthesized geopolymers using water and ethylene-glycol as reference liquids. Geopolymers were synthesized from various precursors: kaolin, bentonite and diatomite. Characterization of phase structure and microstructure was performed by XRD, FTIR, SEM/EDX methods. Contact angle measurements confirmed that the geopolymers synthesized from metakaolin are the most porous, which can be explained by the smallest Si/Al ratio. The maximum value of contact angle and free surface energy (110.2 mJ/m2) has been achieved for geopolymer synthesized by diatoms (GPMD). SEM micrograph of GPMD shows a homogeneous surface with some longitudinal cavities in the gel and is significantly different from the micrographs of other two geopolymer samples, GPMB and GPMK.
    • Correction
    • Source
    • Cite
    • Save
    • Machine Reading By IdeaReader
    0
    References
    5
    Citations
    NaN
    KQI
    []