Vacuum Electrolysis Reactor Technique for Quantitation of 13-Carbon Isotope Enrichment at the C1-Position of Formic Acid and Acetic Acid
2004
A specialized vacuum electrolysis reactor was designed, constructed, and utilized for 13-carbon isotope analysis of formic acid-13C and acetic acid-13C, each highly enriched at the C1-position. This reusable reactor was equipped with two platinum wire electrodes, miniature stir bar, and sidearm reaction chamber. The associated technique developed for 13-carbon isotope analysis is based upon electrolytic generation of carbon dioxide into the preevacuated reactor followed by gas inlet mass spectrometry. It proved practical to degas and electrolyze 95% formic acid (without added electrolyte) due to adequate ionic conductivity. Formic acid-13C (nominally 99 at. % 13C) was measured by electrolytic CO2 generation to be 98.9 at. % 13C. To analyze various 13C-isotopic permutations of acetic acid, lithium and acid were separately added to reactor compartments, vacuum degassed, and stirred to produce an acidic solution. Thus, acetic acid-1-13C that was nominally 99 at. % 13C1 was determined by vacuum electrolysis t...
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
10
References
3
Citations
NaN
KQI