SBR/BiFeO3 Elastomer Capacitor Films Prepared under Magnetic and Electric Fields Displaying Magnetoelectric Coupling

The dielectric properties of elastomer composites formed by dispersions of bismuth ferrite (BiFeO3) multiferroic filler particles in styrene–butadiene rubber (SBR) were studied. The SBR/BiFeO3 films (10–100 μm) were prepared in the presence of electric (E) or magnetic fields (H), showing remarkable characteristics in comparison with systems obtained in its absence. The dispersed multiferroic fillers form clusters of much smaller size when prepared under E or H. The dielectric constant, e (measured up to 1 MHz), increases with BiFeO3 concentration until reaching saturation. The rise of e was obtained at concentrations much lower for samples prepared in the presence of E or H than in its absence. Saturation is assigned to connectivity between filler clusters at the largest concentrations, increasing leakage currents and limiting the dielectric behavior. The whole dependence of e with BiFeO3 concentration was described using a proposed model. The dc resistivities, ρ, increase with BiFeO3 concentration but re...