Research on Laser Brazing Applying Al-Based Amorphous Ribbon

The Al-based amorphous ribbons were prepared by the copper roller melt spinning method, and then the laser brazing was carried out between aluminum alloy and aluminum alloy. Subsequently, the Micro Vickers Hardness Tester, Metallographic Microscope, Scanning Electron Microscopy (SEM) and X-ray Diffraction (XRD) were used to characterize the hardness, morphology, micro structure and composition distribution of the welded joints respectively, so as to analyze the structural characteristic, performance characteristic and binding effect of the matrix metal joints. The results indicate that the prepared Al-based amorphous ribbon is of amorphous structure, the soldering point between aluminum alloy and aluminum alloy is well-connected and the joint’s hardness is identical to that of the base metal. The connection between the metal sheets can be achieved by using Al-based amorphous ribbon as solder, which could provide concrete references for the development and application of amorphous brazing in various fields.