Influence of filament aging and conductive additive in 3D printed sensors

Abstract 3D printing technology combined with electrochemical techniques has allowed the development of versatile and low-cost devices. However, some aspects need to be considered for the good quality and useful life of the sensors. We have demonstrated herein that the filament aging, the conductive material, and the activation processes (post-treatments) can influence the surface characteristics and the electrochemical performance of the 3D printed sensors. Commercial filaments and 3D printed sensors were morphologically, thermally, and electrochemically analyzed. The activated graphene-based (Black Magic®) sensor showed the best electrochemical response, compared to the carbon black-filament (Proto-Pasta®). In addition, we have proven that filament aging harms the performance of the sensors since the electrodes produced with three years old filament had a considerably lower intra-days reproducibility. Finally, the activated graphene-based sensor has shown the best performance for the electrochemical detection of bisphenol A, demonstrating the importance of evaluating and control the characteristics and quality of filaments to improve the mechanical, conductive, and electrochemical performance of 3D printed sensors.