Ammonium polyuranate precipitation from fluoride solutions : an experimental study of the UO{sub 3}-HF-NH{sub 3}-H{sub 2}O system as applied in UF{sub 6} processing.

In the ammonium diuranate (ADU) process, UF{sub 6} is reacted with water, and the acidic solution of uranyl fluoride is treated with aqueous ammonia to precipitate ammonium polyuranate for subsequent reduction to UO{sub 2} and production of fuel pellets for commercial nuclear reactors. Our experiments simulated adding aqueous ammonia to the reaction products of UF{sub 6} and water in typical ADU processes. Chemical and X-ray diffraction analysis of products from the experiments are consistent with postulated chemical equilibria in which solids with structures close to that of ammonium polyuranate are formed from co-precipitation of the NH{sub 4}{sup +}(aq) cation with (previously unreported) anions of the form UO{sub 2}F{sub 3-x}(OH){sub x}{sup -}(aq). More efficient separations of solid products were obtained at NH{sub 4}OH:UF{sub 6} ratios of 19 or greater, with x closer to the value of 3 for the hypothetical formation of pure ammonium polyuranate. Supplementary experiments in the current study and a previous study in our laboratory indicated that nominal uranium concentrations of 90 mg/l in the filtrate resulting from such separations could be reduced to microgram per liter levels by batch mixing a 1-to-2.5 aqueous diluate of the filtrate with the Diphonix{reg_sign} ion exchange resin. Our study further demonstratedmore » that reaction of the purified NH{sub 4}OH-NH{sub 4}F diluate with aqueous Ca(OH){sub 2} at 80 to 90 C could produce essentially uranium-free CaF{sub 2} and an ammonia distillate, as useful waste-conversion end products from a modified ADU process.« less