Charge Transport in MBE-grown 2H-MoTe2 Bilayers with Enhanced Stability Provided by AlOx Capping Layer.

Thin layers of transition metal dichalcogenides have been intensively studied over the last few years due to novel physical phenomena and potential applications. One of the biggest problems in laboratory handling and moving on to application-ready devices lies in a high sensitivity of their physicochemical properties to ambient conditions. We demonstrate that novel, in-situ capping with an ultra-thin, aluminum film efficiently protects thin MoTe2 layers stabilizing their electronic transport properties after exposure to ambient conditions. The experiments have been performed on bilayers of 2H-MoTe2 grown by molecular beam epitaxy on large area GaAs (111)B substrates. The crystal structure, surface morphology and thickness of the deposited MoTe2 layers have been precisely controlled in-situ with reflection high energy electron diffraction system. As evidenced by high resolution transmission electron microscopy MoTe2 films show perfect arrangement in 2H phase and their epitaxial relation to the GaAs (111)B substrates. After the growth the samples were in-situ capped with a~thin (3~nm) film of aluminum, which oxidizes after exposing to ambient conditions. This oxide serves as a~protective layer to the underlying MoTe2. Resistivity measurements of the MoTe2 layers with and without the cap, exposed to low vacuum, nitrogen and air revealed a~huge difference in their stability. The significant rise of resistance is observed for the unprotected sample while the resistance of the protected one is constant. Wide range temperature resistivity studies showed that charge transport in MoTe2 is realized by hopping with an anomalous hopping exponent of $x\simeq$0.66, reported also previously for ultra-thin, metallic layers.