Technique for transfer of high-density, high-aspect-ratio nanoscale patterns in UV nanoimprint lithography and measurement of the release force

Ultraviolet nanoimprint lithography (UV-NIL) is a powerful tool for nanoscale fabrication. However, the replication of high-density, high-aspect-ratio mold patterns by UV-NIL is very difficult because of the strong forces required to release the replicate from the mold. We used a glassy carbon (GC) mold with an antireflective structure, fabricated by irradiation with an oxygen-ion beam, to produce a high-density, high-aspect-ratio pattern, and we evaluated its release properties. The fabricated GC surface contained high-aspect-ratio conical structures with pitch of less than 100nm. After fabrication of the antireflective structure, the mold surface was coated with chromium and a fluorinated silane coupling agent. By using this treatment and a peel motion during mold release, faithful replication of the mold structure in photocurable resin was possible. The release force increased with increasing mold surface area; the surface area effect is therefore the main factor in the mold-release step.