Progress in the development and understanding of advanced low k and ultralow k dielectrics for very large-scale integrated interconnects—State of the art

The improved performance of the semiconductor microprocessors was achieved for several decades by continuous scaling of the device dimensions while using the same materials for all device generations. At the 0.25 μm technology node, the interconnect of the integrated circuit (IC) became the bottleneck to the improvement of IC performance. One solution was introduction of new materials to reduce the interconnect resistance-capacitance. After the replacement of Al with Cu in 1997, the inter- and intralevel dielectric insulator of the interconnect (ILD), SiO2, was replaced about 7 years later with the low dielectric constant (low-k) SiCOH at the 90 nm node. The subsequent scaling of the devices required the development of ultralow-k porous pSiCOH to maintain the capacitance of the interconnect as low as possible. The composition and porosity of pSiCOH dielectrics affected, among others, the resistance of the dielectrics to damage during integration processing and reduced their mechanical strength, thereby af...