Unsteady behaviour of the tip clearance vortex in a rotor equivalent compressor cascade

AbstractFrom earlier experimental investigations in a single-stage axial-flow pump and different numerical calculations of the flow in single-stage axial-flow compressors, it is known that vortex breakdown of the tip clearance vortex can take place in turbomachines, although an experimental proof for subsonic compressors is lacking.Vortex breakdown, if existent, is a source of high instability in the sensitive tip region of axial-flow pumps and compressors and will also play an important role in the stall inception process. Therefore, the flow in a linear compressor cascade with a 3 per cent tip clearance to one side has been investigated at different flow angles from the design point up to the stability limit of the cascade. The cascade resembles the tip section of a single-stage, axial-flow, low-speed compressor that is also in use at the Technical University of Braunschweig.The measuring techniques used were (a) a commercial particle image velocimetry (PIV) system and (b) a pressure measuring system wi...