Multi-element detection in sea water using preconcentration procedure and EDXRF technique

Abstract A method was optimized for detecting trace elements in sea water using Energy dispersive X-ray fluorescence (EDXRF) technique. Sea water samples were pre-concentrated using ammonium pyrrolidinedithiocarbamate (APDC) as chelating agent and methyl isobutyl ketone (MIBK) as organic phase. The preconcentrated samples were dried to form thin films on mylar substrate and analysed using EDXRF spectrometer. The multi-element standard samples prepared in synthetic sea water were used for EDXRF instrument calibration. The instrument was calibrated for 11 elements namely As, Cd, Co, Cr, Fe, Ga, Pb, Se, Sc, V and Zn using linear regression method for concentration up to 200 ppb. The detection limits achieved for As, Cd, Co, Cr, Fe, Ga, Pb, Se, Sc, V and Zn were 13, 70, 5.1, 36, 15, 36, 23, 11, 20, 13 and 40 ppb respectively. The optimized method was used for determination of elements in sea water collected from the Thane creek, Mumbai, India. The results were checked for accuracy by comparing it with inductively coupled plasma atomic emission spectroscopy (ICP AES) technique. The comparison showed the discrepancy of results to be insignificant at 95% confidence level.